AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateStyles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
See the difference
Before
After
Before
After
Before
AfterHow Much Does Heat Pump Installation Cost in Inglewood?
Heat pump installation in Inglewood typically runs $3,500 to $7,500 for a full system, including equipment, labor, and the line and electrical connections a heat pump needs. Smaller single-zone mini-splits and straightforward swap-outs land near the low end, while a larger home with ductwork changes or an electrical upgrade moves toward the top. The written estimate always sets the final price, and we provide that estimate free.
Key Takeaways
- A typical Inglewood heat pump install is an estimated $3,500-$7,500.
- A tune-up to keep an existing system running is $80-$200; a repair on the cooling side is $150-$650.
- Ductwork, electrical work, and the size of your home move the number more than the brand does.
- We work on Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard equipment.
- Call (866) 942-9087 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Inglewood sits in a stretch of the LA basin where summers get genuinely hot and winters stay mild, which is close to the ideal climate for a heat pump. The same equipment that cools your home in August can heat it in January without a separate furnace, and it does both jobs well when it’s sized correctly. That’s the part we spend the most time on: matching the system to the house, not just picking a box off a shelf.
Heat Pump Installation Cost Breakdown (2026)
Here’s how a typical Inglewood heat pump installation breaks down. These are estimated ranges for the market, not a quote for your specific house. Your written estimate will list each line item for your home.
| Line item | Typical estimated cost |
|---|---|
| Full heat pump system (equipment + labor) | $3,500-$7,500 |
| Single-zone mini-split (smaller spaces) | Toward the low end of $3,500-$7,500 |
| Ductwork repair or modification | Added to the system price, quoted per job |
| Electrical panel or circuit upgrade | Added to the system price, quoted per job |
| AC repair on an existing system | $150-$650 |
| Furnace repair (if you’re keeping a furnace) | $150-$700 |
| Tune-up on existing equipment | $80-$200 |
The system itself is the biggest single cost, but what pushes a job toward $7,500 instead of $3,500 is usually the house, not the equipment. A heat pump needs a clear path for refrigerant lines, a circuit sized to handle the compressor, and enough room for the outdoor unit to breathe. In older Inglewood homes, some of that infrastructure simply isn’t there yet, and adding it is where the range opens up. On a straightforward replacement where the connections already exist, the number stays closer to the bottom.
We’ll be straight with you about one thing: whether you’re looking at a heat pump, a straight AC replacement, or a AC repair Inglewood call to keep what you have running, the honest answer starts with a look at the actual equipment. We tell you what it needs, not what costs more.
What Affects Heat Pump Installation Pricing in Inglewood
No two Inglewood homes price out the same, even two on the same block. Here are the factors that move the number the most.
- System size and home layout. A heat pump has to be sized to the square footage, window area, and how open the floor plan is. A smaller condo on the west side prices differently from a full single-family house near downtown Inglewood.
- Whether ductwork exists and how healthy it is. If your home already has ducts, the install is simpler. If they’re undersized, leaking, or missing, that work gets added to the project.
- Electrical capacity. Heat pumps draw more than a furnace. If your panel or circuits can’t carry the load, an upgrade gets factored in before anything gets installed.
- Equipment tier. We work across value lines like Goodman, mid-range lines like Rheem and Bryant, and premium equipment like Trane, Lennox, and Carrier. Your budget and home drive the recommendation, not what a single manufacturer pushes.
- Outdoor unit placement. The condenser needs clearance and a solid base, and where it can go affects line runs and labor. Tight lots and second-story placements take more time.
- Whether you’re replacing or adding. A swap-out of an existing system uses the connections already there. Adding a heat pump to a home that never had one means new lines, a new circuit, and sometimes a new pad.
One thing that doesn’t drive the price in Inglewood the way it does in colder parts of the country: deep-winter preparation. Our winters are mild, so a heat pump handles heating here with room to spare. That’s actually a point in favor of the technology for this market. You get cooling that works in a real Inglewood summer and heating that covers our coolest nights from the same equipment.
Heat Pump Installation vs. Repairing What You Have
If your existing system is limping, the decision isn’t automatic. Here’s the honest math. A repair on the cooling side typically runs $150-$650, and a furnace repair runs $150-$700. A tune-up to keep things running smoothly is $80-$200. Those are real numbers, and they’re worth weighing against the $3,500-$7,500 a full heat pump install represents.
Repair makes sense when the equipment is otherwise sound and the fix is a component, not the whole system. Replacement makes sense when repairs keep coming back, when the system is undersized for the house, or when you’re ready to move from separate heating and cooling equipment to one system that does both. We offer furnace repair and furnace replacement as separate, clearly scoped services, so you’re never pushed toward replacement when repair is still viable. The same goes for a heat pump decision. We’ll lay out both paths and let you choose.
How to Save on Heat Pump Installation
The best way to keep the number down is to get the scope right before anyone orders equipment. A few practical moves:
- Ask for the sizing calculation up front. An oversized heat pump costs more and runs worse. Getting the size right the first time avoids paying twice.
- Check your ducts before you buy. If they need work, knowing that before installation lets you plan for it rather than discovering it mid-job.
- Bundle the electrical conversation into the estimate. If a panel upgrade is coming, price it as part of the project instead of as a surprise later.
- Get a free written estimate. An estimate that itemizes each line is worth more than a single lump sum. Call (866) 942-9087 and we’ll walk through it with you.
- Keep your current system tuned while you decide. A tune-up at $80-$200 can buy you time and comfort until you’re ready to move.
Why Brand Knowledge Matters on a Heat Pump Install
Heat pumps aren’t interchangeable boxes, and the equipment already in your home tells us a lot about what a sensible replacement looks like. We’re fluent in nine of the brands most commonly installed in residential homes: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. That means when we look at your system, we know the parts, the controls, and the quirks of that specific line. You don’t hear “we don’t work on that unit.”
It also means our recommendation isn’t tied to one manufacturer. Because we service premium, mid-range, and value lines, the advice you get is driven by your budget and your home. Installed right the first time is the goal, and that starts with the right equipment for the job, not the most expensive one on the list.
If you’re in Inglewood and weighing a heat pump against keeping separate systems, we’re the one company that handles both sides of the job. AC installation on one end, furnace expertise on the other, so you’re not juggling separate contractors for a single home’s comfort. That’s one company, both systems. If you’re not sure whether a heat pump fits your house, we’ll tell you straight, and if a repair is the smarter move, we’ll say that too.
What to Expect During a Heat Pump Installation
A heat pump install is a planned project, not an emergency repair. It starts with a look at your home: square footage, layout, existing ducts, electrical, and where the outdoor unit can live. From there we put together a written estimate with the equipment and labor itemized. Once you approve it, we schedule the work. On install day, the crew sets the indoor and outdoor units, runs the lines and electrical connections, and charges and tests the system before they leave. You get a walkthrough of the controls and a clear sense of what to expect from the system in an Inglewood summer and winter.
If something does go wrong with your current system while you’re deciding, we also handle the urgent side. A failing AC in July is a repair call, and most cooling repairs fall in the $150-$650 range. Our technicians have up to 10 years of experience, and they diagnose before they recommend. If you’re not sure whether you’re looking at a repair or a replacement, that’s exactly the call to make.
FAQs – Heat Pump Installation Cost
How much does heat pump installation cost in Inglewood?
A full heat pump installation in Inglewood typically runs $3,500-$7,500, including equipment, labor, and the line and electrical work the system needs. Smaller single-zone jobs land near the low end, while larger homes or ones needing ductwork or electrical changes move higher. Call (866) 942-9087 for an exact quote. Estimates are free.
Is it cheaper to repair my AC or install a heat pump?
Almost always cheaper to repair in the short term: cooling repairs run $150-$650 versus $3,500-$7,500 for a full heat pump install. But if repairs keep recurring or your system is undersized, the install can be the better long-term spend. We’ll lay out both sides. Call (866) 942-9087 to talk it through. Estimates are free.
What does a heat pump tune-up cost in Inglewood?
A tune-up on existing equipment typically costs $80-$200. It’s the cheapest way to keep a working system running while you decide whether to repair or replace. Call (866) 942-9087 to schedule. Estimates are free.
Do I need new ductwork for a heat pump in Inglewood?
Not always. If your home already has ducts that are the right size and in decent shape, the install is simpler and stays closer to the low end of the $3,500-$7,500 range. Undersized or leaking ducts get scoped into the job. Call (866) 942-9087 and we’ll take a look. Estimates are free.
Can you install a heat pump the same day?
No. A heat pump installation is a scheduled project that needs sizing, an estimate, and equipment ordered, so it isn’t a same-day job. Repairs can often be done same day, with cooling repairs running $150-$650 and furnace repairs $150-$700. Call (866) 942-9087 to get on the schedule. Estimates are free.
Which heat pump brands do you work on in Inglewood?
We work on Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard equipment, from value lines to premium. That range means equipment advice follows your budget and home rather than one manufacturer. Call (866) 942-9087 to talk about your system. Estimates are free.
Get a Free Heat Pump Estimate in Inglewood
If you’re weighing a heat pump for your Inglewood home, the next step is a free written estimate with the equipment and labor itemized. We’ll size the system to your house, check the ducts and electrical, and give you a clear number. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday. To get started with heat pump installation in Inglewood or anywhere nearby, call (866) 942-9087. Our technicians have up to 10 years of experience, we’re licensed and insured, and we’ll tell you what it needs, not what costs more. Estimates are free, and the written estimate sets the final price.
Pricing reflects the Inglewood market as of 2026. AC Repair Inglewood offers free estimates – call (866) 942-9087.
What Our Customers Say
"Blower motor on a 12 year old furnace. He gave me the honest math on repair versus replace and did not push me toward the bigger ticket. We repaired it and it's been fine."
- Gilbert Hernandez"System is running well again and the price was in line with the other quote I got. The scheduling window was four hours wide and he came at the very end of it, so plan your day accordingly."
- Christine Wong"AC died in August, which in this city is an emergency. He found a blown capacitor, replaced it, and had cold air blowing in under 40 minutes. Charged me about what I'd expect to pay for the part plus a service call."
- Daniel Rhodes